Ford Focus ST 280 Induction Kit
Click to zoom in

Ford Focus ST 280 Induction Kit

FMINDK37
Stock to order In stock
£308.99
£308.99

Ford Focus ST 280 Induction Kit

This FMINDK37 is the new cold air intake system for the Focus ST and has been designed to improve airflow in several key ways. It routes the air more directly into the vehicle’s engine, using an increased diameter CNC mandrel bent alloy pipe. This induction system also improves the airflow by adding our Forge high flow pleated air filter, in place of the more restrictive factory air filter.

The choice of air filter was made after many rolling road sessions and data logging test drives. As we have seen many times before with Ford power plants our Forge Hi-Flow pleated air filters gave the best results. The construction and build quality of the filter oozes superior quality and enhances the ST 280s engine bay. Forge Hi-Flow filters are made using a premium quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.

The CAD designed, laser cut, and precision folded heat shield is designed to form a barrier between the air filter and radiant heat from the engine. It also helps duct the cold air to the air filter, to help preserve low intake temperatures. The heat shield is designed to incorporate the OEM air duct and fits directly to the standard factory air box mounting points and rubbers without the need for modification.

The diameters on this air intake have been carefully tuned to provide exactly the correct quantity of air flow into the turbo charger, ensuring consistent power gains throughout the rev range without any loss of low-end torque, increasing power and enhancing induction acoustics for added character and excitement.

We used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer, this was to ensure all our data has been collated independently, The results below speak for themselves, Testing and development took place on a MK4 ST 280 with Mountune STAGE 1 software. The stock dyno pulls gave a base figure of 307 BHP at 5458 RPM, from simply swapping out to the Forge Motorsport Intake in the matter of around 30 minutes, yields of over 17 BHP were achieved.

When studying the dyno graph below the peak Torque figure does appear to be 5NM below the stock airbox figure however please take note of the 17NM gained from the Forge Motorsport induction kit throughout the midrange.

With both the BHP and torque figures held higher throughout the rev range your engine will definitely have the edge and feel more responsive when pushed to its limits.

 As with all Forge Motorsport products we offer a no quibble lifetime guarantee on all parts of this kit excluding the filter.  

  • Black  powder coating for ultimate protection and durability.  
  • Forge Pleated performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase air flow. 
  • No engine management check lights (EML) 
  • Increased air flow  
  • Lifetime warranty

 

Read More
Read Less

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at info@jbmperformance.co.uk. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at info@jbmperformance.co.uk.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. Please note that the customer is responsible for ensuring the correct part is ordered and fits the vehicle it purchased for.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note the Exceptions / non-returnable items section, which states there are no returns for perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please remember it can take some time for your bank or credit card company to process and post the refund too. Some refunds may incur an admin/restocking fee. 

 

Your cart

×