Sold out
Venom 2.0 TFSI EA113 Hybrid Turbo
Venom 2.0 TFSI EA113 Hybrid Turbo
Venom 2.0 TFSI EA113 Hybrid Turbo
Venom 2.0 TFSI EA113 Hybrid Turbo
Venom 2.0 TFSI EA113 Hybrid Turbo
Venom 2.0 TFSI EA113 Hybrid Turbo
Click to zoom in

Venom 2.0 TFSI EA113 Hybrid Turbo

Venom
JBM7001.1
Stock to order In stock
£1,380.00

Venom 2.0 TFSI EA113 Hybrid Turbo

Venom430

  • Over Sized K06 Aluminium Billet Hi-flow Compressor Wheel With Extended Tip Height
  • Machined Compressor Housing, Profiled and Polished to Minimum Tolerances for Optimum Flow of The Charged Air
  • K16 Turbine Wheel With Cut Back Blades
  • Machined Turbine Housing with Additional Clearance To Reduce Back Pressure
  • Ported Turbine Housing to Optimise Flow of The Exhaust Gases
  • Uprated 360° thrust kit
  • Step Gapped Performance Shaft Piston Ring
  • Modified And Up Rated OEM Actuator
  • Silencer Baffle Delete
  • Designed, Machined and Assembled in House
  • Fully Balanced On Our Vibration Sort Rig
  • Power Output 430BHP*

 Venom450 Ball Bearing Hybrid Specification

  • Venom Hybrid Turbos own design Aluminium Billet Hi-flow Compressor Wheel With Extended Tip Technology
  • Machined Compressor Housing, Profiled and Polished to Minimum Tolerances for Optimum Flow of The Charged Air
  • Custom Turbine wheel designed by Venom hybrid Turbos
  • Garrett GTX Full Ceramic Ball Bearing Cartridge
  • Machined Turbine Housing with Additional Clearance To Reduce Back Pressure
  • Ported Turbine Housing to Optimise Flow of The Exhaust Gases
  • Modified And Up Rated OEM Actuator
  • Silencer Baffle Delete
  • Designed, Machined and Assembled in House
  • Fully Balanced On Our Vibration Sort Rig
  • Power Output
  • All based on findings without water meth 
  • Maximum boost pressure 2.5 bar peak and 2.2 running pressure

Venom Hybrid Turbo Complete Installation kit (C.I.K)

This turbo C.I.K (Complete Installation Kit) starts with a stock K04-64 turbo and utilises our custom ball bearing CHRA from our VENOM450 hybrid turbo but removing the restriction for big power which is the throat of the stock manifold / turbine housing and engineering a larger flowing and more efficient housing but still keeping it very easy to install compared to other larger frame turbo setups which require a custom manifold keeping the cost down.

******Venom's development was done running 99 ron fuel and water meth and produced 481BHP******

Estimated power outputs for different fuels but still meth.

95Ron 440BHP

99Ron 480BHP

102Ron 500+BHP

 

Modifications required

With any high powered vehicle with a hybrid turbo, you will always require additional hardware (full list below) and a custom remap to get the full benefits.

  • Upgraded Intake
  • De-cat and performance exhaust
  • Intercooler and induction kit
  • Uprated Injectors with RS4 Pressure valve or K04 Injectors with 165 bar fuel rail pressure valve.
  • Low Pressure fuel pump upgrade
  • Upgraded engine internals (highly recommended)

 

Your turbo unit is required to be converted if you select "Reconditioned".

Place your order, let us know when your turbo is ready for collection and we will arrange collection from the delivery address unless otherwise stated.
Once your unit arrives, we will inspect it and ship your new unit.

Please get in touch if you require a fast exchange and we can ship you a unit out before we receive your exchange unit. You would just need to pay an additional surcharge in advance, which will be refunded once your exchange unit arrives with us. Please note that this will only be processed if your exchange turbocharger unit meets the desired requirements. i.e 

Read More
Read Less

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at info@jbmperformance.co.uk. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at info@jbmperformance.co.uk.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. Please note that the customer is responsible for ensuring the correct part is ordered and fits the vehicle it purchased for.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note the Exceptions / non-returnable items section, which states there are no returns for perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please remember it can take some time for your bank or credit card company to process and post the refund too. Some refunds may incur an admin/restocking fee. 

 

Your cart

×