BMW M135i (F40) Quad Exit M3 Style Turbo Back Performance Exhaust
Requires mandatory ECU reflash when fitted to PPF models. Fitment is for motorsport and off road use only.
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This quad tailpipe exhaust conversion (quad exit / 4 tailpipes) BMW M135i performance exhaust is made in 3"/76.2mm pipework and fit from the turbo backwards (turbo-back system), these parts replace the front pipe, centre and rear sections.
The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
Once fitted, the new Cobra Sport M135i quad tip exhaust conversion and replacement body panel look entirely at home on the car and gives the M135i a much sportier edge with dynamic sound and improved looks.
This performance exhaust is designed to fit with the addition of the Maxton Design quad exit M3 Style rear valance panel (Please click here to view this product, Maxton Design part code: BM-1-40-MPACK-RS2G).
All relevant fittings and gaskets are supplied.
Please Note:
The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will continue to swap from quieter to louder tones as before.
IMPORTANT: this exhaust removes the PPF filter and will require engine tuning at time of fitment to cancel the EML light.
Maxton Design Rear Valance is not included - please purchase this directly from Maxton Design here.
Fitment is for motorsport and off road use only as this system removes the PPF filter.
Press Release
The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, sporting BMW’s B48 2 litre, 4-cylinder engine. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional driving experience.
Cobra Sport opted for 3”/76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40).
Cobra Sport have transformed the styling of the BMW M135i, creating a quad exit conversion that draws attention to the peachy rear of BMW's hot hatch. With 4" (101.6mm) carbon fibre quad tips specifically selected to ensure you stand out from the crowd and draw attention to the looks as well as the sound of your M135i.
The all-new GPF/PPF-Back quad exit performance exhaust with rear silencer perfectly compliments the 'jack of all trades' character of the M135i. In comfort mode the exhaust valve is closed, allowing the driver to cruise around and eat up the miles in comfort, with just a subtle hint that there is over 300BHP available at the press of the right foot.
Switch to Sport mode and the drive of the M135i is transformed, the exhaust valve opens allowing exhaust gases to be split between the rear silencer and a rear silencer by-pass, enhancing the exhaust sound levels and allowing the M135i to sing to its hearts content and recording 91dB at 4,000rpm, an increase of +11.1dB - capturing the motorsport heritage that runs through the veins of the M135i.
Cobra Sport has also developed their race box delete performance exhaust for the ultimate thrill seeker. This system takes inspiration from Cobra Sport's venom range by removing the rear silencer and exhaust valves, the race box delete allows for the biggest upgrade in terms of sound levels recording 92.8dB at 4000RPM (+12.9dB) at all times - whilst keeping the factory fit catalyst and GPF (gasoline particulate filter) in place.
Media
Static Sound Example - Non-Valved GPF Back with Box Delete
Static Sound Example - Valved GPF Back with Rear Box
Brand Video - Designed to demand attention, engineered to lead.
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@jbmperformance.co.uk. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@jbmperformance.co.uk.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. Please note that the customer is responsible for ensuring the correct part is ordered and fits the vehicle it purchased for.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note the Exceptions / non-returnable items section, which states there are no returns for perishable goods, custom products (such as special orders or personalised items). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please remember it can take some time for your bank or credit card company to process and post the refund too. Some refunds may incur an admin/restocking fee.
